Tarun Scientific Instruments (TSI)
Send Email
Call 0804876547879% Response Rate
Search

Home » Our Products » Test Chambers


Test Chambers

Offering you a complete choice of products which include thermal stability chamber, thermal test chambers, test chamber, thermal chamber, climatic test chamber and corrosion test chamber.

Thermal Stability Chamber

REQUEST CALLBACK

Thermal Stability Chamber
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 75,000 / UnitGet Latest Price

Product Details:
BrandTSI
Automation GradeAutomatic
Voltage230 - 415 V
Temperature Range+200 deg C
Country of OriginMade in India
MaterialMS, SS
Humidity Range95 % RH
Power SourceElectric
ColorWhite, Grey
TypeThermal Stability Chamber

Timer

Delta make digital timer-1No

Sensor

PT100, RTD with acrylic covered

Spray System

Will be in the center of the chamber

Door System

Manual open with viewing acrylic/glass window

Saturation Tower

SS saturation tower

Chamber Heater

SS tubular heater

Saturation Heater

Immersion type heater with high cold zone

Solution Tank

25 Liters capacity build with chamber

Wall Material

Polypropylene

Wall Finishing

Wall finished with epoxy coating.

Inner Chamber

Will contain spray tank, measuring cylinder, acrylic rack, hanging rods and bottom tray.

Mobility

Heavy duty castor wheels-4 No’s

Features

  1. Schneider make MCB’S and contactors
  2. Emergency cut-off.
  3. Air pressure regulation system
  4. FRP rods for hanging test specimens
  5. Hooter for alarm indication
  6. High temperature safety cut off through thermostat.
  7. Alarms for high/low set parameters.
  8. Low water level alarm
  9. SSR for Heaters
  10. Drain facility for solution tank & chamber
  11. Solenoid valve & Float sensor for water level control
Yes! I am interested

Thermal Test Chambers

REQUEST CALLBACK

Thermal Test Chambers
  • Thermal Test Chambers
  • Thermal Test Chambers
  • Thermal Test Chambers
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 55,000 / UnitGet Latest Price

Product Details:
BrandTSI
Usage/ApplicationIndustrial Ovens
Automation GradeSemi-Automatic
MaterialMS, SS
Voltage230 - 415 V
Humidity Range95 % RH
Power SourceElectric
Temperature Range Degree C+300 deg C
ColorWhite, Grey
TypeThermal Stability Chamber
Country of OriginMade in India

Timer

Delta make digital timer-1No

Sensor

PT100, RTD with acrylic covered

Spray System

Will be in the center of the chamber

Door System

Manual open with viewing acrylic/glass window

Saturation Tower

SS saturation tower

Chamber Heater

SS tubular heater

Saturation Heater

Immersion type heater with high cold zone

Solution Tank

25 Liters capacity build with chamber

Wall Material

Polypropylene

Wall Finishing

Wall finished with epoxy coating.

Inner Chamber

Will contain spray tank, measuring cylinder, acrylic rack, hanging rods and bottom tray.

Mobility

Heavy duty castor wheels-4 No’s

Features

  1. Schneider make MCB’S and contactors
  2. Emergency cut-off.
  3. Air pressure regulation system
  4. FRP rods for hanging test specimens
  5. Hooter for alarm indication
  6. High temperature safety cut off through thermostat.
  7. Alarms for high/low set parameters.
  8. Low water level alarm
  9. SSR for Heaters
  10. Drain facility for solution tank & chamber
  11. Solenoid valve & Float sensor for water level control

Additional Information:

  • Delivery Time: 2 weeks
  • Yes! I am interested

    Test Chamber

    REQUEST CALLBACK

    Test Chamber
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 2.2 Lakh / UnitGet Latest Price

    Product Details:
    Usage/ApplicationIndustrial
    BrandTSI
    Temperature Range-200 to 1000 Deg C
    MaterialMS, Aluminum, etc
    PhaseSingle Phase
    Voltage230-240 V
    Light SourceElectronic
    Frequency50-60 Hz

    Test Chambers reproduce environmental conditions within a contained space for the purposes of evaluating the long-term effects of specific changes upon objects such as industrial products, electronic products and other components. These conditions simulate those which a product will typically encounter in the span of its useful life. Environmental test chambers evaluate a product's quality and durability, and identify potential flaws and malfunctions that exist either in product design or material choice before the product reaches the public market. Industries ranging from medical, construction and automotive to consumer, food processing and packaging use test chambers on everyday products such as car parts, make-up, medicines and kitchen appliances. Products undergo this testing in certain environmental conditions; the findings allow for production adjustments by the manufacturer and result in a better quality product arriving on the market. Common procedures recorded in test chambers include the effects of extremes of temperature and sudden variations of temperature in temperature chambers and cryogenic chambers, the effects of humidity and moisture in humidity test chambers, and salt spray tests which record the degrading effects of salt water and corrosion-resistance of objects for manufacturer analysis. Other types of test chambers include: Altitude chambers, thermal shock chambers and vacuum test chambers. The design and construction of the test chamber has to be carefully considered. As it is a process test, test chambers need to have a means of viewing and monitoring the testing procedure either through a viewing hole, or through a video feed. In some cases, an environmental test chamber will have a "reach-in" capability in order for the testing engineer to handle the product or material being tested. The method of process control is another consideration to be undertaken as control panels can be either analog or digital, fed by a computer or the web etc. Environmental test chambers are designed with the capacity to replicate extreme environmental conditions. Temperature chambers can typically reach temperatures above 1000 degrees Fahrenheit, and cryogenic chambers produce temperatures on the other end of the scale achieving lows of -200 degrees Fahrenheit, or even lower with the help of liquid nitrogen. In addition to temperature variations which can be further tested by thermal shock chambers, humidity and air moisture content can be replicated with humidity ranging from 10-100% in most humidity chambers. Altitude chambers simulate extremely high altitudes to test the effects of pressure and air change, and routinely 10-8 Torr levels are achieved in vacuum environmental chambers. Test chambers have to be carefully constructed in order to achieve controlled and consistent testing.

    Yes! I am interested

    Thermal Chamber

    REQUEST CALLBACK

    Thermal Chamber
    • Thermal Chamber
    • Thermal Chamber
    • Thermal Chamber
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 55,000 / UnitGet Latest Price

    Product Details:
    BrandTSI
    Usage/ApplicationIndustrial
    Automation GradeAutomatic
    Temperature Range Degree C+300 deg C
    Country of OriginMade in India
    MaterialMS, SS
    Voltage230 - 415 V
    Humidity Range95 % RH
    Power SourceElectric
    ColorWhite, Grey
    TypeThermal Chamber

    Timer

    Delta make digital timer-1No

    Sensor

    PT100, RTD with acrylic covered

    Spray System

    Will be in the center of the chamber

    Door System

    Manual open with viewing acrylic/glass window

    Saturation Tower

    SS saturation tower

    Chamber Heater

    SS tubular heater

    Saturation Heater

    Immersion type heater with high cold zone

    Solution Tank

    25 Liters capacity build with chamber

    Wall Material

    Polypropylene

    Wall Finishing

    Wall finished with epoxy coating.

    Inner Chamber

    Will contain spray tank, measuring cylinder, acrylic rack, hanging rods and bottom tray.

    Mobility

    Heavy duty castor wheels-4 No’s

    Features

    1. Schneider make MCB’S and contactors
    2. Emergency cut-off.
    3. Air pressure regulation system
    4. FRP rods for hanging test specimens
    5. Hooter for alarm indication
    6. High temperature safety cut off through thermostat.
    7. Alarms for high/low set parameters.
    8. Low water level alarm
    9. SSR for Heaters
    10. Drain facility for solution tank & chamber
    11. Solenoid valve & Float sensor for water level control

    Additional Information:

  • Delivery Time: 2 weeks
  • Yes! I am interested

    Climatic Test Chamber

    REQUEST CALLBACK

    Climatic Test Chamber
    • Climatic Test Chamber
    • Climatic Test Chamber
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 2.8 Lakh / UnitGet Latest Price

    Product Details:
    BrandTSI
    Temperature Range-80 deg C to +200 deg C
    Accuracy+/-1 deg C & +/-3%Rh
    Automation GradeAutomatic
    Humidity Range10% to 98% RH
    Ramp Rate10/5/3/2/1 deg C per minute
    Country of OriginMade in India
    Usage/ApplicationLaboratory, Industrial

    We are manufacturing the Climatic Test Chambers for the range of -80 deg C to +200 deg C and the relative humdity is 10% to 98%Rh with various sizes.
    Yes! I am interested

    Corrosion Test Chamber

    REQUEST CALLBACK

    Corrosion Test Chamber
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 1.75 Lakh / UnitGet Latest Price

    Product Details:
    MaterialPP
    Usage/ApplicationCorrosion Test
    BrandTSI
    Voltage230V
    Testing StandardsASTM B117
    Country of OriginMade in India
    Chamber TemperatureAdjustable from ambient to +50 DegreeC
    Saturation TemperatureAdjustable from ambient to +65 DegreeC
    Power SupplySingle phase, 50 Hz
    Wall MaterialPolypropylene
    SensorPT100, RTD with acrylic covered

    Temperature Controller

    Autonics make digital temperature controller-2No’s

    Timer

    Delta make digital timer-1No

    Sensor

    PT100, RTD with acrylic covered

    Spray System

    Will be in the center of the chamber

    Door System

    Manual open with viewing acrylic/glass window

    Saturation Tower

    SS saturation tower

    Chamber Heater

    SS tubular heater

    Saturation Heater

    Immersion type heater with high cold zone

    Solution Tank

    25 Liters capacity build with chamber

    Wall Material

    Polypropylene

    Wall Finishing

    Wall finished with epoxy coating.

    Inner Chamber

    Will contain spray tank, measuring cylinder, acrylic rack, hanging rods and bottom tray.

    Mobility

    Heavy duty castor wheels-4 No’s

    Features

    1. Schneider make MCB’S and contactors
    2. Emergency cut-off.
    3. Air pressure regulation system
    4. FRP rods for hanging test specimens
    5. Hooter for alarm indication
    6. High temperature safety cut off through thermostat.
    7. Alarms for high/low set parameters.
    8. Low water level alarm
    9. SSR for Heaters
    10. Drain facility for solution tank & chamber
    11. Solenoid valve & Float sensor for water level control

    Additional Information:

  • Delivery Time: 4 Weeks
  • Yes! I am interested

    Corrosion Resistance Test Chamber

    REQUEST CALLBACK

    Corrosion Resistance Test Chamber
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 1.9 Lakh / UnitGet Latest Price

    Product Details:
    Minimum Order Quantity5 Unit
    MaterialSteel
    Usage/ApplicationIndustrial
    BrandTSI
    PhaseSingle, Three
    Voltage240-380V
    Frequency (Hz)50 Hz
    Pressure Gauge (bar)1 to 5 Bar
    Tank Pressure (psi)100 PSI
    Country of OriginMade in India

    We are manufacturing Corrosion resistance test chamber with PP material and it is having single wall type and double wall type. We are following ASTM B117 standard. We are manufacturing as per our standard sizes and also custom design too.

    The different sizes are:
    • 750 x 600 x 600mm-270 liters
    • 900 x 600 x 600mm-324 liters
    • 1000 x 800 x 800mm-640 liters
    • 1200 x 750 x 750mm- 675 liters
    Yes! I am interested

    Cooling Test Chambers

    REQUEST CALLBACK

    Cooling Test Chambers
    • Cooling Test Chambers
    • Cooling Test Chambers
    • Cooling Test Chambers
    • Cooling Test Chambers
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 1.4 Lakh / UnitGet Latest Price

    Product Details:
    BrandTSI
    Usage/ApplicationIndustrial
    MaterialMS, SS
    ShapeRectangular
    Capacity200 L
    Temperature RangeAmbient to -80 deg C
    InsulationPUF
    Compressor MakeEmerson/Danfoss/Bitzer
    Warranty1 year
    Country of OriginMade in India

    Timer

    Delta make digital timer-1No

    Sensor

    PT100, RTD with acrylic covered

    Spray System

    Will be in the center of the chamber

    Door System

    Manual open with viewing acrylic/glass window

    Saturation Tower

    SS saturation tower

    Chamber Heater

    SS tubular heater

    Saturation Heater

    Immersion type heater with high cold zone

    Solution Tank

    25 Liters capacity build with chamber

    Wall Material

    Polypropylene

    Wall Finishing

    Wall finished with epoxy coating.

    Inner Chamber

    Will contain spray tank, measuring cylinder, acrylic rack, hanging rods and bottom tray.

    Mobility

    Heavy duty castor wheels-4 No’s

    Features

    1. Schneider make MCB’S and contactors
    2. Emergency cut-off.
    3. Air pressure regulation system
    4. FRP rods for hanging test specimens
    5. Hooter for alarm indication
    6. High temperature safety cut off through thermostat.
    7. Alarms for high/low set parameters.
    8. Low water level alarm
    9. SSR for Heaters
    10. Drain facility for solution tank & chamber
    11. Solenoid valve & Float sensor for water level control

    Additional Information:

  • Delivery Time: 5 weeks
  • Yes! I am interested

    Thermal Shock Chamber

    REQUEST CALLBACK

    Thermal Shock Chamber
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 6 Lakh / UnitGet Latest Price

    Product Brochure
    Product Details:
    Minimum Order Quantity5 Unit
    Voltage415V
    BrandTSI
    Country of OriginMade in India
    Basket MovementVertical
    Zone Type2 Zone / 3 Zone
    Basket Size400 x 400 x 400mm, Aso available in 500 x 500 x 500, 600 x 600 x 500 mm
    Temperature Range-80 deg C to +180 deg C
    Basket Transition TimeLess than 10 Sec
    Recovery TimeLess than 10-15 minutes
    Sensor for TemperaturePT-100 (RTD), class-A
    Temperature ControllerEurotherm / PLC with HMI
    Resolution0.1 deg C
    Power Supply3 Phase, 50 Hz

    Construction:
    • Mono-block construction with I-section base frame. The body is impervious with thermally isolated blocks which can resist high-low temperatures.
    • Exterior with min 2mm thick MS/GI with powder coated panels with impressive precision & aesthetics.
    • Interiors (unobstructed) with high gloss brush finish 18swg stainless steel with reinforced flooring to withstand heavy distributed loads and illumination lights inside.
    • Multi-level diagonally joined airlock silicone rubber sealing the door and chamber with conduction free isolation mounts.
    • Internal test chamber and outer body is isolated using mineral wool ensuring no air pockets and zero conduction and heat loss.
    • The chamber shall be mounted on 4" Heavy-duty castor wheels and leveling pads ensuring easy erection & movement of the system.
    • Multi-pane condensation-free glass inspection window on the hot zone door for viewing the test basket specimen.

    Test Space Conditioning:
    • Easy to access conditioning plenum for maintenance
    • Single molded light weight high cfm co-axial fan for uniform air-circulation.
    • Vibration-free Stainless Steel joint-free extended shaft external flange mounted induction motor.
    • Modular conditioning unit consisting of heat-exchangers, air-circulation system and heating system.

    Refrigeration System:
    • Hermetic/Semi-hermetic compressor/s are mounted on vibration-free compression spring/rubber bush tightened with desired torque level
    • Eco friendly Non-CFC refrigerants R-404a & R- 23 and Air cooled refrigeration system
    • Evaporator heat exchanger coils full collared bullet expanded for high efficient heat transfer.
    • Automatic bypass control system based on suction pressure and temperature on variable loading / no load conditions, and temperature control accuracy.
    • Efficient oil return managing system for protection of compressor from lack of lubrication
    • vi. Condenser unit will be in outside.

    Heating System:
    • Stainless steel sheathed/ bare nichrom air heaters to achieve the set temperature.
    • The heaters shall be placed in the conditioning section to avoid any radiation of heat onto the test specimen.
    • Heater outputs are controlled through zero-crossing relay/ Thyristor for superior stability and control of temperature.

    Safety & Protection:
    • MPCB/MCB for all the individual 3-phase and 1-phase power devices
    • Single phase, phase reversal, under voltage and over voltage protection for main input power
    • EMI protection for control circuit
    • Test specimen Tmax and Tmin independent safety protection
    • Over temperature safety thermal fuse (Fixed).
    • High and low pressure safety protection
    • Inbuilt winding thermal protection for compressor (Only Semi-hermetic)
    • Compressor Oil level protection - OPS (Only Semi-hermetic <10HP)
    • Compressor high discharge temperature protection
    • Tmax and Tmin programming safety protection(Controller inbuilt)

    Specifications:
    • Data Logging: RS-232/485/Ethernet communication port with supporting software to interface with system.
    • Electrical Items: Schneider / TC/ Siemens
    • Basket Movement: The test basket is pneumatically operated and guided with rails for a vibration free transfer.

    Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 8 weeks
  • Yes! I am interested

    Heating Chamber

    REQUEST CALLBACK

    Heating Chamber
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 30,000 / UnitGet Latest Price

    Product Details:
    Size350 x 350 x 350mm, Also available in 450 x 450 x 450 / 600 x 600 x 600 mm
    Temperature RangeAmbient to +120 deg C / 200 deg C / +300 deg C
    ControllerPPI,Select
    Controlling Accuracy+/- 1 deg C
    SensorPT-100,RTD,Class A
    OuterMS with powder coated / SS 304
    InnerSS 304
    InsulationGlass wool
    TraysSS mesh tray
    Power Supply230 V,Single Phase,50 Hz
    BrandTSI
    Country of OriginMade in India

    We are offering Heating Chamber to our clients with high-quality range.
    Yes! I am interested

    Curing Chamber

    REQUEST CALLBACK

    Curing Chamber
    • Curing Chamber
    • Curing Chamber
    • Curing Chamber
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 5 Lakh / UnitGet Latest Price

    Product Details:
    BrandTSI
    Country of OriginMade in India
    MaterialMS, SS, etc
    Automation GradeSemi Automatic
    ControllerSelect / Eurotherm
    SensorPT-100, RTD, Class A
    InsulationPUF and Glass wool
    Condenser and EvaporatorFin and Tube type
    Power Supply230 V, Single Phase, 50 Hz/ 415 V, Three Phase

    Timer

    Delta make digital timer-1No

    Sensor

    PT100, RTD with acrylic covered

    Spray System

    Will be in the center of the chamber

    Door System

    Manual open with viewing acrylic/glass window

    Saturation Tower

    SS saturation tower

    Chamber Heater

    SS tubular heater

    Saturation Heater

    Immersion type heater with high cold zone

    Solution Tank

    25 Liters capacity build with chamber

    Wall Material

    Polypropylene

    Wall Finishing

    Wall finished with epoxy coating.

    Inner Chamber

    Will contain spray tank, measuring cylinder, acrylic rack, hanging rods and bottom tray.

    Mobility

    Heavy duty castor wheels-4 No’s

    Features

    1. Schneider make MCB’S and contactors
    2. Emergency cut-off.
    3. Air pressure regulation system
    4. FRP rods for hanging test specimens
    5. Hooter for alarm indication
    6. High temperature safety cut off through thermostat.
    7. Alarms for high/low set parameters.
    8. Low water level alarm
    9. SSR for Heaters
    10. Drain facility for solution tank & chamber
    11. Solenoid valve & Float sensor for water level control
    Yes! I am interested

    Aging Chamber

    REQUEST CALLBACK

    Aging Chamber
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 3 Lakh / PieceGet Latest Price

    Product Details:
    Temperature Range-80 to +200 degree C
    Humidity Range10% to 97%Rh
    SensorRotronics make Capacitive type sensor
    BrandTSI
    ApplicationElectronics PCB manufacturing
    RefrigerantCFC free
    Country of OriginMade in India

    We are manufacturing Aging Chambers for Electronics PCB board manufacturers. 

    Additional Information:

  • Delivery Time: 10 Weeks
  • Yes! I am interested

    Thermostatic Water Chamber

    REQUEST CALLBACK

    Thermostatic Water Chamber
    • Thermostatic Water Chamber
    • Thermostatic Water Chamber
    • Thermostatic Water Chamber
    • +3 Thermostatic Water Chamber
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 80,000 / UnitGet Latest Price

    Product Details:
    Country of OriginMade in India
    Voltage230 - 415 V
    Automation GradeAutomatic
    Accuracy+/-1 deg C
    Warranty1 year
    Temp. Resolution0.1 deg C
    BrandTSI
    Temperature Range+5 to +100 deg C

    Timer

    Delta make digital timer-1No

    Sensor

    PT100, RTD with acrylic covered

    Spray System

    Will be in the center of the chamber

    Door System

    Manual open with viewing acrylic/glass window

    Saturation Tower

    SS saturation tower

    Chamber Heater

    SS tubular heater

    Saturation Heater

    Immersion type heater with high cold zone

    Solution Tank

    25 Liters capacity build with chamber

    Wall Material

    Polypropylene

    Wall Finishing

    Wall finished with epoxy coating.

    Inner Chamber

    Will contain spray tank, measuring cylinder, acrylic rack, hanging rods and bottom tray.

    Mobility

    Heavy duty castor wheels-4 No’s

    Features

    1. Schneider make MCB’S and contactors
    2. Emergency cut-off.
    3. Air pressure regulation system
    4. FRP rods for hanging test specimens
    5. Hooter for alarm indication
    6. High temperature safety cut off through thermostat.
    7. Alarms for high/low set parameters.
    8. Low water level alarm
    9. SSR for Heaters
    10. Drain facility for solution tank & chamber
    11. Solenoid valve & Float sensor for water level control
    Yes! I am interested

    Vacuum Chambers

    REQUEST CALLBACK

    Vacuum Chambers
    • Vacuum Chambers
    • Vacuum Chambers
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 40,000 / UnitGet Latest Price

    Product Details:
    Minimum Order Quantity5 Unit
    Controlling Accuracy+/-2 deg C
    OuterMS with powder coated / SS 304
    Size280 mm dia x 380 mm depth
    ControllerSelect / Eurotherm
    Trays1 No's
    DoorHandle, lock and Asbestos gasket for leak proof
    OptionalTimer, Hooter, Vacuum pump
    Temperature Range+5 deg C above ambient to +200 deg C
    SensorRTD, PT100, Grade-A
    Vacuum Range100 LPM
    InnerSS 304
    InsulationGlass Wool
    Power Supply230 V, 50 Hz, Single Phase
    Country of OriginMade in India

    Vacuum chambers use a vacuum pump to remove air and pressure from within a sealed compartment for the purpose of evaluating the effects of a vacuum on objects, materials or components. Environmental test chambers such as vacuum chambers are used by manufacturers to test a product for flaws and malfunctions before it is released to the public. Having a well-tested product ensures less cost in terms of warranty and guarantee reimbursements.

    Vacuum chambers have the capability to withstand the pressure caused by creating a vacuum, and are usually made from metals such as aluminum and mu-metal. As vacuum testing is used across a wide range of industries, it is possible that the chambers are designed and constructed with the capability of replicating certain environmental conditions of temperature and altitude in addition to creating a vacuum environment. Environmental testing simulates the actual conditions a product is likely to face during its useful lifespan, and therefore more than one environmental effect is necessary to get an accurate idea of how a product will respond. In order for the engineer to watch the results of a vacuum upon an object, there is typically a viewing port or window sealed with rubber. Sizes of vacuum chambers can vary greatly, from smaller bench top chambers used to test miniature components and objects, to larger chambers able to encompass objects of a much larger nature.

    Several industries rely on vacuum packaging to help produce the best quality product possible. Aerospace engineers use vacuum testing for all the components of space travel equipment, which have to be able to withstand the effects of a vacuum and low pressure environment for extended periods of time. Vacuum testing can be undertaken on spacecraft electronics and circuits, lenses and filters and coatings and structural materials. Vacuum molding plastic manufacturers use vacuum chambers when mixing resins and silicone rubbers to ensure a bubble-free mold replica. The material to be inserted into the mold is placed in a vacuum chamber to remove all existing air bubbles, and to make it ready to pour into the mold without leaving blemishes. Vacuum chambers are also used for testing the sealing in packaging and the potential for leaks and possible malfunctions under pressure.

    This is useful especially for export packaging where goods will be subjected to high altitudes during transportation by air and in the pharmaceutical and medical industries where it is necessary for medicines to remain sealed until use. Vacuum testing can take many hours and can be a costly procedure, and yet it is a wise manufacturing choice to undergo environmental testing, especially in terms of long-term expenditure.
    Yes! I am interested

    Benchtop Climatic Test Chamber

    REQUEST CALLBACK

    Benchtop Climatic Test Chamber
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 1.1 Lakh / UnitGet Latest Price

    Product Details:
    Minimum Order Quantity10 Unit
    Country of OriginMade in India
    Temperature range-55 Degree C / -40 Degree C/ -20 Degree C to +120 DegreeC
    Size450 x 300 x 450mm , Also available in 450 x 450 x 450mm
    Control SystemManual / Automatic
    ControllerSelect / Eurotherm
    SensorPT-100, RTD, Class A
    Controlling Accuracy+/- 1 Degree C
    AlarmTemperature deviation high/ low alarm
    OuterMS with powder coated / SS 304
    InnerSS 304
    InsulationPUF and Glass wool.
    CompressorEmerson / Danfoss /Tecumseh
    RefrigerantCFC Free
    Condenser and EvaporatorFin and Tube type
    UniformityForced air circulation using electrical fan
    MobilityHeavy duty castor wheels
    Power supply230 V, Single Phase, 50 Hz/ 415 V, Three Phase
    TraysAdjustable type SS mesh tray.
    Sample visibilityVacuum glass will be in door.
    BrandTSI

    We are renowned as the distinguished manufacturer and supplier in the concerned domain, actively engaged in offering of a wide array of Benchtop Climatic Test Chamber.

    Specifications:
    • Door: Double walled door inner lined with SS, SS handle, lock with key and silicon gasket, glass window, door light, door heater.
    • Options: Humidity setup, tower lamp, hour meter, hooter, port hole, drain facility, specimen protection for high temp cut off.
    Yes! I am interested

     
    X


    Explore More Products

    Contact via E-mail
    Contact via SMS
    Siva Ranjani S (Business Development Manager)
    Tarun Scientific Instruments (TSI)
    No. 108, Phase II, Vasanthapuri Nagar, Poonamallee
    Chennai - 600056, Tamil Nadu, India
    Call Us: 
    Call Response Rate: 79%
    Share Us :



    Home  |   Profile   |  Our Products  |  Site Map  |   Contact Us

    © Tarun Scientific Instruments (TSI). All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited

    Tarun Scientific Instruments (TSI)