Tarun Scientific Instruments (TSI)
Tarun Scientific Instruments (TSI)
Poonamallee, Chennai, Tamil Nadu
GST No. 33BBJPK6060R1Z5
TrustSEAL Verified
Call 0804604137384% Response Rate
SEND EMAIL

Salt Spray Chambers

Offering you a complete choice of products which include salt spray apparatus, salt spray test chamber, cass salt spray chamber, salt fog chamber, salt water spray chamber and salt spray chamber.

Salt Spray Apparatus

Salt Spray Apparatus
  • Salt Spray Apparatus
  • Salt Spray Apparatus
Ask For Price
Product Price :Get Latest Price

Product Details:

Minimum Order Quantity1 Piece
MaterialPP
BrandTSI
Display TypeDigital
Frequency50Hz
Testing StandardsASTM B117
Usage/ApplicationCorrosion testing

We are manufacturng Salt Spray Apparatus as per ASTM B117 in different Sizes & Capcity.

Models : Manual / Automatic
Temperature range : Ambient to +50°C
Saturated Temperature : Ambient to +65°C
Humidity Range : 60% to 95%RH
Salt-Spray Fall-out Rate Adjustable from 0.5 to2.5ml per 80cm² per hr
Capacity in Liters : 300, 600,900,1500 liters
Solution Reservoir Capacity : 120 to 200 liters
Standards of compliance : ASTM,DIN,GM,JIS,MIL,etc.,
Specimen Hanging Capacity : 2kg-4kg Controller Resistive analog color touch screen with RS232, RS422/485 ports.
Timer : Programmable digital timer for pre-set time operation
Heater : Low density ceramic layer rope heaters
Outer :  Nonmetallic GRP material
Inner : Nonmetallic GRP material
Load : 2.5kw- 5kw
Water Supply : Demineralized/Deionized continuous water connection 0.5- 3.0 bar
Air Supply : Clean dry & Oil free, 4.0 to 6.0 bar
Drain : 25mm female BSP threaded provision with 3m flexible drain pipe provided
Exhaust : 50mm female BSP threaded provision provided
Insulation : Mineral wool
Mobility : Heavy duty castor wheels
Others :
Pre-configured 4-level solution display indication
Easy user access control panel
Pneumatic guided salt spray lid opening with auto-air purge interlock
FRP rods for hanging the test specimen
Safety MCB for all the individual EMI protection for control unit
Over temperature protection for saturator and chamber
Air pressure safety protection
saturator low water protection
Earth protection
Power supply : 230V, Single Phase, 50h
Request
Callback


Additional Information:

  • Delivery Time: 4 weeks
Yes! I am interested

Salt Spray Test Chamber

Salt Spray Test Chamber
  • Salt Spray Test Chamber
Ask For Price
Product Price :Get Latest Price

Product Details:

BrandTSI
Temperature RangeAmbient to +50 Deg C
Capacity300,600,900,1500 liters
Humidity Range60% to 95%RH
Saturated TemperatureAmbient to +65 Deg C
Salt Spray Fall Out RateAdjustable from 0.5 to2.5ml per 80cm2 per hr
Solution Reservoir Capacity120 to 200 liters
Standards Of ComplianceASTM,DIN,GM,JIS,MIL,etc
Specimen Hanging Capacity2kg-4kg
ControllerResistive analog color touch screen with RS232,RS422/485 ports
TimerProgrammable digital timer for pre-set time operation
HeaterLow density ceramic layer rope heaters
OuterNonmetallic GRP material
Load2.5kw- 5kw
Water SupplyDemineralize/De ionized continuous water connection 0.5- 3.0 bar
Air SupplyClean dry & Oil free,4.0 to 6.0 bar
Drain25mm female BSP threaded provision with 3m flexible drain pipe provided
Exhaust50mm female BSP threaded provision provided
InsulationMineral wool
MobilityHeavy duty castor wheels
Power Supply230V,Single Phase,50hz

Salt Spray Test Chambers are used to test a product or material in a highly corrosive environment for the purposes of evaluating the long-term effects of salt on an object and its ability to withstand the effects of corrosion. Environmental test chambers evaluate product quality and reliability and identify manufacturing flaws and weaknesses in those products before they are released to the general market. The test results recorded through the process of salt spray testing can show the process of product decay and degradation and help predict the potential lifespan of a product or coating. Within the sealed test chamber, a salt-laden spray or a salt-fog (mainly sodium-chloride) is produced by a high-pressure nozzle to check the corrosion resistance of product coatings or coverings for products usually made from steel, brass and other metals. The metal object is normally hung from a rod or hook in order to expose the most surface area possible for testing purposes. As most metals are highly susceptible to corrosion, protective coatings are often used as a barrier between the metal and the exposure to salt spray and fog. Coatings which are often tested in salt spray test chambers include phosphate surfaces, zinc and zinc alloy plating’s, electroplating with chromium, copper, and tin, organic coatings and certainly painted coatings. Industries which rely on salt spray testing include automotive, construction, aerospace and industrial. The process of salt spray testing is relatively cheap, quicker than other forms of environmental testing and reasonably repeatable. Yet, replicating corrosion is complicated due to the susceptibility of it being further affected by other external factors. Therefore, the test results and the predicted lifespan of a material may not be completely accurate, and so the design and construction of the salt spray test chambers need to be carefully considered. Industry standards in terms of size, test duration, and procedure need to be understood and met before undergoing testing. Salt chambers are typically approximately fifteen cubic feet, and yet larger custom designed chambers can be made too. Using a pressurized supply of salt-spray or fog leads to an accelerated rate of corrosion in objects and therefore testing time can vary from taking a few minutes to a number of days depending on the type and detail of data required. Testing can be a costly procedure depending on the size and process undertaken, and yet it is a wise manufacturing choice to undergo environmental testing, especially in terms of long-term expenditure and future benefit
Request
Callback
Yes! I am interested

CASS Salt Spray Chamber

CASS Salt Spray Chamber
  • CASS Salt Spray Chamber
Ask For Price
Product Price :Get Latest Price

Product Details:

Usage/ApplicationIndustrial
BrandTSI
MaterialPP
Power230V
Display TypeDigital
Testing StandardsASTM B117
Temperature+65 Celsius

We are manufacturing CASS Salt Spray Chamber for the below spec,

Make

TSI

Model

Basic, Horizontal model

Wall Type

Single/Double

Standard

As per ASTM B117

Chamber Temperature

Adjustable from ambient to +50°C

Saturation Temperature

Adjustable from ambient to +65°C

Solution Spray Rate

Adjustable from 0.5 to 2.5ml per 80 cm2 per hr

Temperature Controller

Autonics make digital temperature controller-2No’s

Timer

Delta make digital timer-1No

Sensor

PT100, RTD with acrylic covered

Spray System

Will be in the center of the chamber

Door System

Manual open with viewing acrylic/glass window

Saturation Tower

SS saturation tower

Chamber Heater

SS tubular heater

Saturation Heater

Immersion type heater with high cold zone

Solution Tank

25 Liters capacity build with chamber

Wall Material

Polypropylene

Wall Finishing

Wall finished with epoxy coating.

Inner Chamber

Will contain spray tank, measuring cylinder, acrylic rack, hanging rods and bottom tray.

Mobility

Heavy duty castor wheels-4 No’s

Features

  1. Schneider make MCB’S and contactors
  2. Emergency cut-off.
  3. Air pressure regulation system
  4. FRP rods for hanging test specimens
  5. Hooter for alarm indication
  6. High temperature safety cut off through thermostat.
  7. Alarms for high/low set parameters.
  8. Low water level alarm
  9. SSR for Heaters
  10. Drain facility for solution tank & chamber
  11. Solenoid valve & Float sensor for water level control

Power Supply

230v, Single phase, 50hz

Optional

  1. Fully touch controller with PLC.
  2. Pneumatic door.
  3. Double wall type
Request
Callback
Yes! I am interested

Salt Fog Chamber

Salt Fog Chamber
  • Salt Fog Chamber
Ask For Price
Product Price :Get Latest Price

Product Details:

BrandTSI
Capacity600-700 L
Ambient Temperature50-60 Deg C
TimerProgrammable digital timer for pre-set time operation
Power2.5-5 kW
Voltage230 V
PhaseSingle
Frequency50-60 Hz

We are offering Salt Fog Chamber to our clients with high-quality range.
Request
Callback
Yes! I am interested

Salt Water Spray Chamber

Salt Water Spray Chamber
  • Salt Water Spray Chamber
Ask For Price
Product Price :Get Latest Price

Product Details:

Usage/ApplicationLaboratory
BrandTSI
Frequency Range50Hz
Voltage230v
WallSingle & Double
StandardASTM B117

We are manufacturing Salt Water Spray Chamber as per ASTM B117 with different sizes.
Request
Callback


Additional Information:

  • Delivery Time: 3 Weeks
Yes! I am interested

Salt Spray Chamber

Salt Spray Chamber
  • Salt Spray Chamber
Ask For Price
Product Price :Get Latest Price

Product Details:

Minimum Order Quantity1 Unit
Usage/ApplicationIndustrial
BrandTSI
MaterialPP
Frequency50Hz
Testing StandardsASTM B117
Air Pressure230V
I Deal InNew Only
Capacity300, 600,900,1500 liter
PhaseSingle
Power SourceElectric
Voltage230V
Country of OriginMade in India

We are manufacturing salt spray chamber as per ASTM B117 in different sizes.
Request
Callback


Additional Information:

  • Delivery Time: 4 Weeks
Yes! I am interested
X

Explore More Product

View All Product


Reviews & Rating

5/5

★★★★★★★★★★

Reviewed by 2 Users

  • 5★2
  • 4★0
  • 3★0
  • 2★0
  • 1★0
  • User Satisfaction
  • Response100%
  • Quality     100%
  • Delivery   100%

Most Relevant Reviews

I
★★★★★★★★★★
19-April-22
Indiamart User
Chennai, Tamil Nadu
.
Response
Quality
Delivery
K
★★★★★★★★★★
12-June-22
Kumar
Vellore, Tamil Nadu
Product Name : Walk-In Chamber

View More Reviews




Reach Us
Siva Ranjani S (Business Development Manager)
Tarun Scientific Instruments (TSI)
No. 108, Phase II, Vasanthapuri Nagar
Poonamallee, Chennai - 600056, Tamil Nadu, India


Call Us


Send E-mail