Salt Spray Chambers

Product Details:

Salt Spray Test Chambers are used to test a product or material in a highly corrosive environment for the purposes of evaluating the long-term effects of salt on an object and its ability to withstand the effects of corrosion. Environmental test chambers evaluate product quality and reliability and identify manufacturing flaws and weaknesses in those products before they are released to the general market. The test results recorded through the process of salt spray testing can show the process of product decay and degradation and help predict the potential lifespan of a product or coating. Within the sealed test chamber, a salt-laden spray or a salt-fog (mainly sodium-chloride) is produced by a high-pressure nozzle to check the corrosion resistance of product coatings or coverings for products usually made from steel, brass and other metals. The metal object is normally hung from a rod or hook in order to expose the most surface area possible for testing purposes. As most metals are highly susceptible to corrosion, protective coatings are often used as a barrier between the metal and the exposure to salt spray and fog. Coatings which are often tested in salt spray test chambers include phosphate surfaces, zinc and zinc alloy plating’s, electroplating with chromium, copper, and tin, organic coatings and certainly painted coatings. Industries which rely on salt spray testing include automotive, construction, aerospace and industrial. The process of salt spray testing is relatively cheap, quicker than other forms of environmental testing and reasonably repeatable. Yet, replicating corrosion is complicated due to the susceptibility of it being further affected by other external factors. Therefore, the test results and the predicted lifespan of a material may not be completely accurate, and so the design and construction of the salt spray test chambers need to be carefully considered. Industry standards in terms of size, test duration, and procedure need to be understood and met before undergoing testing. Salt chambers are typically approximately fifteen cubic feet, and yet larger custom designed chambers can be made too. Using a pressurized supply of salt-spray or fog leads to an accelerated rate of corrosion in objects and therefore testing time can vary from taking a few minutes to a number of days depending on the type and detail of data required. Testing can be a costly procedure depending on the size and process undertaken, and yet it is a wise manufacturing choice to undergo environmental testing, especially in terms of long-term expenditure and future benefit

Product Details:

We are manufacturng Salt Spray Apparatus as per ASTM B117 in different Sizes & Capcity.

Models : Manual / Automatic
Temperature range : Ambient to +50°C
Saturated Temperature : Ambient to +65°C
Humidity Range : 60% to 95%RH
Salt-Spray Fall-out Rate Adjustable from 0.5 to2.5ml per 80cm² per hr
Capacity in Liters : 300, 600,900,1500 liters
Solution Reservoir Capacity : 120 to 200 liters
Standards of compliance : ASTM,DIN,GM,JIS,MIL,etc.,
Specimen Hanging Capacity : 2kg-4kg Controller Resistive analog color touch screen with RS232, RS422/485 ports.
Timer : Programmable digital timer for pre-set time operation
Heater : Low density ceramic layer rope heaters
Outer :  Nonmetallic GRP material
Inner : Nonmetallic GRP material
Load : 2.5kw- 5kw
Water Supply : Demineralized/Deionized continuous water connection 0.5- 3.0 bar
Air Supply : Clean dry & Oil free, 4.0 to 6.0 bar
Drain : 25mm female BSP threaded provision with 3m flexible drain pipe provided
Exhaust : 50mm female BSP threaded provision provided
Insulation : Mineral wool
Mobility : Heavy duty castor wheels
Others :
Pre-configured 4-level solution display indication
Easy user access control panel
Pneumatic guided salt spray lid opening with auto-air purge interlock
FRP rods for hanging the test specimen
Safety MCB for all the individual EMI protection for control unit
Over temperature protection for saturator and chamber
Air pressure safety protection
saturator low water protection
Earth protection
Power supply : 230V, Single Phase, 50h

Additional Information:

• Delivery Time: 4 weeks

Product Details:

We are manufacturing Salt Water Spray Chamber as per ASTM B117 with different sizes.
Models : Manual / Automatic
Temperature range : Ambient to +50°C
Saturated Temperature : Ambient to +65°C
Humidity Range : 60% to 95%RH
Salt-Spray Fall-out Rate Adjustable from 0.5 to2.5ml per 80cm² per hr
Capacity in Liters : 300, 600,900,1500 liters
Solution Reservoir Capacity : 120 to 200 liters
Standards of compliance : ASTM,DIN,GM,JIS,MIL,etc.,
Specimen Hanging Capacity : 2kg-4kg Controller Resistive analog color touch screen with RS232, RS422/485 ports.
Timer : Programmable digital timer for pre-set time operation
Heater : Low density ceramic layer rope heaters
Outer :  Nonmetallic GRP material
Inner : Nonmetallic GRP material
Load : 2.5kw- 5kw
Water Supply : Demineralized/Deionized continuous water connection 0.5- 3.0 bar
Air Supply : Clean dry & Oil free, 4.0 to 6.0 bar
Drain : 25mm female BSP threaded provision with 3m flexible drain pipe provided
Exhaust : 50mm female BSP threaded provision provided
Insulation : Mineral wool
Mobility : Heavy duty castor wheels
Others :
Pre-configured 4-level solution display indication
Easy user access control panel
Pneumatic guided salt spray lid opening with auto-air purge interlock
FRP rods for hanging the test specimen
Safety MCB for all the individual EMI protection for control unit
Over temperature protection for saturator and chamber
Air pressure safety protection
saturator low water protection
Earth protection
Power supply : 230V, Single Phase, 50h

Additional Information:

• Delivery Time: 3 Weeks

Product Details:

We are manufacturing salt spray chamber as per ASTM B117 in different sizes.
Salt spray test chambers are used to test a product or material in a highly corrosive environment for the purposes of evaluating the long-term effects of salt on an object and its ability to withstand the effects of corrosion. Environmental test chambers evaluate product quality and reliability, and identify manufacturing flaws and weaknesses in those products before they are released to the general market. The test results recorded through the process of salt spray testing can show the process of product decay and degradation and help predict the potential lifespan of a product or coating. Within the sealed test chamber, a salt-laden spray or a salt-fog (mainly sodium-chloride) is produced by a high-pressure nozzle to check the corrosion resistance of product coatings or coverings for products usually made from steel, brass and other metals. The metal object is normally hung from a rod or hook in order to expose the most surface area possible for testing purposes. As most metals are highly susceptible to corrosion, protective coatings are often used as a barrier between the metal and the exposure to salt spray and fog. Coatings which are often tested in salt spray test chambers include: phosphate surfaces, zinc and zinc alloy plating’s, electroplating with chromium, copper and tin, organic coatings and certain painted coatings

Additional Information:

• Delivery Time: 4 Weeks

Product Details:

We are manufacturing CASS Salt Spray Chamber for the below spec,

Product Details:

We are offering Salt Fog Chamber to our clients with high-quality range.
Salt Spray chambers are commonly used to evaluate the corrosive properties of: Phosphated surfaces (with subsequent paint/primer/lacquer/rust preventive) Zinc and Zinc-alloy plating (see also electroplating) Electroplated chromium, nickel, copper, and tin.